Planned Maintenance Program

SAVE On Your Energy Bills With The Point Heating Planned Maintenance Program!

Why Planned Maintenance?

Being a member of our Planned Maintenance Program ensures that your HVAC equipment is thoroughly inspected every year. This inspection is recommended by all HVAC equipment manufacturers and is usually required to maintain product warranties. In addition, our inspections will ensure your heating, cooling and indoor air units operate at peak performance and provide efficiency and safety yearlong. This will reduce your heating and cooling bills and save you even more by reducing expensive repair costs and extending the life of your HVAC equipment.

 

6 Reasons to Use Planned Maintenance with Point Heating

  1. Minimizes your heating and cooling costs
  2. PRIORITY emergency service whenever needed
  3. Provides a 10% DISCOUNT on all repairs
  4. Prolongs the life of your equipment
  5. Ensures better indoor air quality & a healthier home
  6. Assures maximum safety for your home and family

 

PLANNED MAINTENANCE COMPONENTS

Furnace 12 Point Safety Check

  1. Check heat exchanger for cracks or leaks
  2. Check for carbon monoxide (CO)
  3. Inspect and clean main burner
  4. Inspect and clean pilot
  5. Inspect and clean igniter and flame sensor
  6. Check flame to make sure it’s burning correctly and adjust as needed
  7. Check gas pressure and make necessary adjustments
  8. Lubricate bearings and motor as needed
  9. Check furnace air filter
  10. Check operating and safety controls
  11. Inspect furnace exhaust ventilation for cleanliness or cracks
  12. Ensure efficient operation, making adjustments as needed

 

Air Conditioning 10 Point Check

  1. Check compressor
  2. Check refrigerant charge
  3. Check and adjust fan speed and belt tension
  4. Lubricate blower bearings and motor
  5. Check or replace furnace filter (Filter at additional cost)
  6. Check drain line
  7. Check air temperature difference across refrigerant coil
  8. Test complete system operation
  9. Ensure efficient operation, making adjustments as needed
  10. Check and clean condenser using co2 or standard water pressure

 

Indoor Air Quality

Check, inspect, clean and ensure any indoor air quality products are operating at optimal performance to ensure a healthier home environment. We also replace any components, as needed.

Following are some IAQ products included in our program:

Humidifier

  1. Clean inside of humidifier
  2. Check operation
  3. Clean drain line
  4. Replace humidifier pad (pad may be an additional cost unless stated otherwise)

Air Exchanger

  1. Clean filters
  2. Clean drain line (if applicable)
  3. Clean air intake screens (if accessible)
  4. Test operation

Electronic Air Cleaner

  1. Test operation
  2. Clean cells (additional cost applies)

UV Light

  1. Test operation
  2. Replace bulbs every 2 years (bulbs may be an additional cost unless noted)

Pure Air

  1. Test operation of UV light
  2. Replace filter every year (Filter may be an additional cost unless noted)
  3. Replace bulbs every 2 years (bulbs may be an additional cost unless noted)
  4. Replace titanium core every 2 years (Core may be an additional cost unless noted)

Zoned System

  1. Check operation of all dampers & thermostats

Start saving on your heating and cooling bills! Call us at 715-345-1979 today to sign up for our Planned Maintenance Program.